1. Pool water care

The pool water must be clear enough for the coin to be visible at the bottom of the pool. It should be free of turbidity, organic matter, and bacteria. Also, the pool water evaporates, and a chemical change occurs.

Another change occurs in the chemical balance when you add water to raise the water level in your filter skimmers. To keep your water clean, you need to monitor your pH level constantly.

2. Check water chemistry

Check the water regularly, at least once a week. When purchasing a pool, you must purchase a test kit. The most straightforward kit usually includes color-coded strips. The strips should be dipped in water and compared to the colors on the container.

Another test kit requires filling a bottle with pool water and adding a few drops of liquid reagent or water coloring tablets. Then you compare the color to the colors on the container. Either way, the colors will tell you how many disinfectants, pH, or alkalinity your water needs to bring it to a healthy level.

A few tips!

1. Use a new water testing kit every season.
2. Before checking, make sure the filter has been running for about half an hour.
3. Use the test kit in a pool area not adjacent to the skimmer or in the corner of the pool where you cannot completely filter the water.

3. Adding chemicals

When handling chemicals and adding them to the pool, strictly follow the chemical manufacturer’s instructions.

If you test the water yourself, you will also add chemicals based on your findings. What is the correct way to add chemicals to water?

a. Powders. There are usually two ways to add them to water. The first is to add the powders directly to the water. The best way to ensure even distribution of powders is to pour them into different parts of the pool slowly.

Don’t just toss them while standing, as the wind can throw the powder back at you. Instead, bend over and gently pour in a small amount of water. The problem with this method is that the powders can take time to dissolve.

Another way to add powdered chemicals is to mix them with pool water taken directly from the pool in a dedicated bucket. Thus, the powder has time to dissolve before adding it to the water.

b. If using liquid chemicals, pour the solution directly into the pool water but avoid splashing.

c. Tablets placed in a floating dispenser are another way to add chemicals. Please place them in a device that floats around the pool and dispenses chemicals.

Whichever method you use, never add chemicals directly to the skimmer because they can be filtered out in the filtration system before they can circulate in the pool.

4. Shocking pool

After a heavy rain, in extreme heat, or after a big party where many people have used the pool, you may need to shock or severely chlorinate the water.

It will help remove dirt. The pool specialist will help you determine if you need to shock the pool. A preliminary water analysis will also help determine if you need to super-chlorinate your pool.

5. Empty skimmer baskets

Check skimmer baskets for debris and empty them daily. Pull the baskets out, empty the contents and rinse them with water from the pool or hose. It will help maintain proper filter and pump performance.

A clogged skimmer basket will obstruct the flow of water through the system. Sometimes leaves, grass clippings, insects, or other fine dirt will get into the water. To do this, use a long-handled pool net to remove debris from the surface of the water.

Keep it handy, as you will need to do this almost every day to keep the surface clean. Do not rely on skimmer baskets to clean the surface. These routine tasks can help you maintain a healthy and clean pool environment.

6. Vacuum and clean

If you plan to do routine tasks yourself rather than hire a cleaning service to keep your pool clean, you will need to vacuum. Vacuum the entire pool bottom and collect debris along the way. You can choose a vacuum cleaner depending on your type of pool.

To use the vacuum cleaner correctly, you must read the manufacturer’s instructions. Vacuuming is not difficult at all. Especially if you buy an automatic vacuum cleaner, they move along the bottom of the pool and clean for you.

7. Brush the sides of the pool

Should clean the liner or tiles on the concrete pool every two weeks to prevent algae from accumulating above and just below the waterline. To do this, you will need a tile brush and a unique pool tile cleaner that works well for vinyl, tile, and fiberglass pools.

Tip! Do not use household detergents to allow foreign chemicals to enter your pool

Conclusion

As you can see, taking care of the pool is easy!

All you need for independent work is

1. Skimmer
2. Test kit for water and chemicals
3. Vacuum cleaner
4. Garden hose

Tip! To organize everything correctly, make a schedule for cleaning the pool and strictly follow the schedule.

When you do this job a few times, you will become very good at your pool’s needs! You will become a pro! And you will enjoy swimming in the pool with your friends and family!

Protection on the Job

When you are working, your right to receive and use appropriate eye protection is guaranteed by the federal government. Specifically, the Occupational Safety and Health Administration’s 1911.133. This requires that employers issue eye protection that meets the standards of the American National Standards Institute’s Z87.1 standard.

Employers are not required to issue prescription safety glasses. However, they do need to at least provide eyewear that can be worn along with corrective lenses. Of course, many workers request that they receive prescription glasses because they are typically more comfortable. Some employers will provide these voluntarily. Some workers also choose to purchase their own, especially when working long hours.

Protective eyewear needs to be provided for any task or environment that could be reasonably considered hazardous to the eyes. This includes any setting with fine particles, fumes, splashes, potential impacts and more. Learn more about OSHA’s regulations to understand your rights as an employee.

Always take ace and eye protection seriously when working. There are around 300,000 workplace eye injuries every year. An estimated 90% of these could have been prevented if proper eye protection had been used.

Eye Strain

Another risk for many professionals is eye strain from computer usage. While this is not as immediately dangerous as the above-mentioned hazards, it can cause significant eyesight damage over time. A simple tip is to follow the 20-20-20 rule:

• Every 20 minutes take a break from looking at digital screens.
• This break should last 20 seconds.
• During this time, look at something 20 feet away from you.

Protection at Home

Of course, the workplace isn’t the only place that you can face eye hazards. Many of the same dangers exist in the home, especially when cleaning or doing DIY projects. Splashing injuries cause around 125,000 household injuries per year. Again, the vast majority of these could have been prevented by wearing safety glasses. These are some common household hazards:

• Household Chemicals: There are many dangerous chemicals used in homes that can splash or emit harmful fumes. Cleaning solutions, bleach, gasoline, pesticides, fertilizer and more are potentially dangerous. Wear protective eyewear when working with dangerous chemicals, especially when mixing them. Also, ensure proper ventilation to avoid accumulation of harmful fumes.
• Tools: Whenever you are working with power tools, wear appropriate eye protection. Safety glasses can make all the difference if a sudden splinter or shard shoots out from a saw, drill or other power tools. Also, make sure to regularly clean items like lawnmowers and even brooms. Preventing the accumulation of dust and fine particles can protect your eyes.
• Playing Sports: Many sports involve potential hazards for the eyes. For example, basketball is a common source of eye injuries, yet many players don’t wear eye protection. The same applies to recreational activities such as fishing and golf. Even a regular pair of sunglasses is a better option than no protection at all.

Many of these reasons for wearing eye protection may seem extreme. After all, people clean their houses and do DIY work all the time without wearing glasses. However, many of those people experience eye injuries. While most of the time your eyes will be fine, do you really want to take the gamble that the next time you are working with tools could be the last time you see fully? Like all protective equipment, safety glasses only work if you wear them.

Protection From Sun

Another common source of damage to eyesight is UV radiation. The sun can be very harmful to your eyes if you don’t properly protect them. Sunglass tinting can help reduce some of the harshness of bright light. However, it alone does not sufficiently protect your eyes.

Fortunately, many glasses have UV radiation filtering as a treatment to the lenses. At Marvel Optics, we can apply this to many of our lenses as a customization option. When you are ordering your glasses, make sure to select the UV-protection option.

Additionally, we offer polarizing filters for most lenses. This special type of filter greatly reduces the incoming UV and light intensity. Combined with UV protection, polarization can help to more effectively protect your eyesight from the sun.

Most people tend to wear sunglasses at the beach and during the summer. However, you can harm your eyes even in cold environments. Snowy areas such as ski resorts can be especially dangerous because the white snow reflects UV light at your eyes, increasing the intensity and danger. If you ever step outside and your eyes feel sore, you should be wearing sunglasses.

What To Do If You Harm Your Eyes

Of course, accidents happen. Even if you are always wearing your prescription safety glasses when you should, you can make a mistake or be in an unforeseen accident. So, it is helpful to know what to do when this happens.

First, if it is a serious injury involving a direct impact with the eyeball, a large splinter or dangerous chemical leak, go to the emergency room immediately. Modern medicine is incredible and can treat major injuries if you act fast.

If it is less serious and can be effectively treated with first aid such as rinsing the eye, schedule an appointment soon with your eye doctor. It is always best to check to ensure that there is no permanent damage.